Installing Vinyl Plank Flooring In Bathroom Around Toilet

Installing Vinyl Plank Flooring in Bathrooms Around Toilets

Installing vinyl plank flooring in bathrooms around toilets can be tricky, but with the right preparation, it can be done relatively easily. Here are the essential steps to ensure a successful installation:

1. Measure and Cut the Planks

Measure the area around the toilet where you will be installing the flooring. Cut the planks to fit the space, making sure to leave a small gap (about 1/4 inch) around the toilet base.

2. Prepare the Subfloor

The subfloor must be smooth, level, and dry. Clean the subfloor thoroughly and repair any cracks or holes. If necessary, level the subfloor using a self-leveling compound.

3. Apply Adhesive

Apply a thin layer of adhesive to the subfloor using a notched trowel. Be sure to follow the manufacturer's instructions for the type of adhesive you are using.

4. Lay the Planks

Starting from one corner, lay the planks in place. Press down firmly to ensure they are securely adhered to the subfloor. Stagger the joints of the planks for a more durable installation.

5. Cut Around the Toilet Base

Once the flooring is installed around the toilet, you will need to cut around the base. Use a sharp utility knife and carefully cut the planks to fit the contour of the base.

6. Secure the Edges

To prevent the flooring from shifting, secure the edges with baseboards or quarter round molding. Nail or glue the molding in place.

7. Seal the Joints

To prevent water from seeping into the joints, seal them using a clear silicone caulk. Apply a bead of caulk along the joints and smooth it out with your finger or a damp cloth.

Tips for Success

* Use a moisture-resistant vinyl plank flooring specifically designed for bathroom installations. * Allow the adhesive to dry completely before using the flooring. * Clean the floor regularly with a damp mop and a mild cleaning solution. * Avoid using harsh chemicals or abrasive cleaners on the flooring. * If you encounter any problems during installation, consult the manufacturer's instructions or a professional installer.