How To Put Down Linoleum Flooring On Concrete

How to Install Linoleum Flooring on Concrete

Installing linoleum flooring on concrete is a relatively straightforward process that can be completed in a few hours. However, there are a few essential steps that must be followed in order to ensure a successful installation.

Materials and Tools Required

Linoleum flooring
Concrete adhesive
Notched trowel
Tape measure
Chalk line
Utility knife
Roller
Seam roller
Caulk gun
Caulk

Surface Preparation

The first step is to prepare the concrete surface. This involves cleaning the concrete with a degreaser to remove any dirt or grease, and then repairing any cracks or holes with a concrete patch.

Once the concrete is clean and repaired, it should be primed with a concrete primer. This will help to improve the adhesion of the adhesive.

Laying the Linoleum

Once the surface is prepared, the next step is to lay the linoleum. Start by measuring and marking the center of the room. Then, roll out the linoleum and center it on the marks.

Use a chalk line to mark the placement of the linoleum. Then, apply a layer of adhesive to the concrete surface, using a notched trowel.

Place the linoleum on the adhesive and press it down firmly. Use a roller to smooth out any air bubbles.

Seaming the Linoleum

If the linoleum does not cover the entire floor in one piece, it will need to be seamed. To do this, place the two pieces of linoleum side by side and overlap them by about 1 inch.

Apply a bead of adhesive to the overlap and press the two pieces together. Use a seam roller to flatten the seam.