How To Install Vinyl Plank Flooring On Bathroom Walls

How to Install Vinyl Plank Flooring on Bathroom Walls

Installing vinyl plank flooring on bathroom walls is a great way to update the look of your bathroom without breaking the bank. Vinyl plank flooring is relatively easy to install, and it is a durable and waterproof option that is perfect for bathrooms. Here are the steps on how to install vinyl plank flooring on bathroom walls:

Step 1: Prepare the Walls

The first step is to prepare the walls by cleaning them and removing any dirt or debris. You will also need to remove any old wallpaper or paint. Once the walls are clean, you will need to apply a primer to help the vinyl plank flooring adhere to the walls. Allow the primer to dry completely before moving on to the next step.

Step 2: Measure and Cut the Vinyl Planks

Next, you will need to measure and cut the vinyl planks to fit the walls. You can use a tape measure to measure the walls and a utility knife to cut the planks. Be sure to cut the planks slightly smaller than the walls so that they will fit snugly. If you need to make any cuts around corners, use a utility knife to score the plank and then snap it off.

Step 3: Install the Vinyl Planks

Now it's time to install the vinyl planks on the walls. Use a trowel to apply a thin layer of adhesive to the back of the plank. Starting in the corner of the room, press the plank into place on the wall. Use a level to make sure that the plank is level. Once the plank is in place, use a roller to press it firmly against the wall. Continue installing the planks in this manner until the entire wall is covered. Be sure to stagger the joints between the planks so that they do not line up.

Step 4: Trim the Excess Vinyl

Once all of the vinyl planks are installed, you will need to trim the excess vinyl around the edges of the walls. Use a utility knife to score the vinyl plank and then snap it off. Be careful not to cut into the drywall.

Step 5: Caulk the Joints

The final step is to caulk the joints between the vinyl planks. This will help to seal the joints and prevent water from seeping through. Use a caulking gun to apply a thin bead of caulk to each joint. Smooth the caulk with your finger or a caulk tool. Once the caulk has dried, your bathroom walls will be complete.

Tips for Installing Vinyl Plank Flooring on Bathroom Walls

Use a level to make sure that the vinyl planks are level.
Stagger the joints between the planks so that they do not line up.
Be careful not to cut into the drywall when trimming the excess vinyl.
Caulk the joints between the vinyl planks to prevent water from seeping through.