How To Install Vinyl Plank Flooring On Walls

How to Install Vinyl Plank Flooring on Walls

Installing vinyl plank flooring on walls is an increasingly popular DIY project, as it provides both a durable and stylish finish. Vinyl planks are available in a wide range of colors and textures, making them a versatile choice for any room. With a little preparation and the right tools, you can achieve a professional-looking installation that will last for years to come.

Materials and Tools

* Vinyl plank flooring * Wall adhesive * Utility knife * Level * Measuring tape * Pencil * Safety glasses * Gloves * Hammer or nail gun * Pry bar

Preparation

Clean the wall surface: Remove any dirt, dust, or grease from the wall using a cleaner specifically designed for vinyl flooring. Allow the wall to dry completely.

Remove baseboards and moldings: If necessary, remove any baseboards or moldings that will interfere with the installation of the vinyl planks.

Check for level: Use a level to check the wall for any unevenness. If necessary, level the wall using drywall shims or a leveling compound.

Installation

Apply adhesive: Apply a thin layer of wall adhesive to the back of the first vinyl plank. Use a spreader or trowel to ensure even coverage.

Place the first plank: Carefully position the first vinyl plank on the wall, starting from the bottom corner. Use a level to ensure that the plank is straight and level.

Secure the plank: Press the plank firmly into place, ensuring that it is fully adhered to the wall. Use a hammer or nail gun to secure the plank if necessary.

Continue the installation: Repeat steps 3-4 for each subsequent vinyl plank, aligning the edges carefully. Interlock the planks together as per the manufacturer's instructions.

Trim the last plank: Measure and mark the last plank to fit the remaining space on the wall. Use a utility knife to trim the plank to size.

Secure and finish: Install the last plank and secure it in place. Reinstall any baseboards or moldings that were removed.