How To Install Mohawk Laminate Flooring On Concrete

Laminate flooring is a great choice for homeowners who want the look of hardwood floors without the high cost. It is also a relatively easy flooring type to install, even for beginners. If you are planning to install Mohawk laminate flooring on concrete, there are a few things you need to do to ensure a successful installation.

1. Prepare the concrete subfloor

The first step is to prepare the concrete subfloor. The subfloor must be smooth, level, and dry. If the subfloor is not level, you will need to level it using a self-leveling compound. Once the subfloor is level, you will need to clean it thoroughly to remove any dust or debris.

2. Install an underlayment

Once the subfloor is prepared, you will need to install an underlayment. An underlayment is a thin layer of material that is placed between the concrete subfloor and the laminate flooring. The underlayment helps to provide a cushion for the laminate flooring and reduce noise. It also helps to prevent moisture from seeping up through the concrete and damaging the laminate flooring.

3. Install the laminate flooring

Now you are ready to install the laminate flooring. Start by laying out the first row of planks along one wall. Be sure to leave a small gap between the wall and the planks. This gap will allow the laminate flooring to expand and contract without buckling. Once the first row is installed, you can begin installing the second row. To do this, simply align the tongue of one plank with the groove of the adjacent plank and click them together. Continue installing the laminate flooring in this manner until the entire floor is covered.

4. Trim the excess flooring

Once the laminate flooring is installed, you will need to trim the excess flooring around the edges of the room. To do this, use a utility knife to score the laminate flooring along the edge of the wall. Then, use a pry bar to remove the excess flooring.

5. Install the baseboards

The final step is to install the baseboards. Baseboards cover the gap between the laminate flooring and the wall. They also help to give the room a finished look. To install the baseboards, simply nail them into the wall.

Tips for installing Mohawk laminate flooring on concrete

Here are a few tips for installing Mohawk laminate flooring on concrete:

Use a moisture barrier between the concrete subfloor and the underlayment. This will help to prevent moisture from seeping up through the concrete and damaging the laminate flooring.
Make sure that the subfloor is completely dry before installing the laminate flooring. If the subfloor is not dry, the laminate flooring may buckle or warp.
Use a tapping block and a mallet to tap the laminate planks together. This will help to ensure a tight fit and prevent the planks from coming apart.
Allow the laminate flooring to acclimate to the room for at least 24 hours before installing it. This will help to prevent the flooring from expanding or contracting after it is installed.