How To Install Mohawk Laminate Flooring On Concrete Floor

Installing Mohawk laminate flooring on a concrete floor is a great way to add style and value to your home. The key to a successful installation is to properly prepare the concrete floor and follow the manufacturer's instructions.

Here are the essential steps on how to install Mohawk laminate flooring on a concrete floor:

1. Prepare the concrete floor

The concrete floor must be clean, dry, and level. Remove any dirt, debris, or old flooring. If the floor is not level, you will need to level it using a self-leveling compound.

2. Install a vapor barrier

A vapor barrier will help to prevent moisture from seeping up from the concrete floor and damaging the laminate flooring. Roll out the vapor barrier over the concrete floor and tape the seams together.

3. Install the underlayment

The underlayment will help to cushion the laminate flooring and reduce noise. Roll out the underlayment over the vapor barrier and tape the seams together.

4. Install the laminate flooring

Start by installing the first row of laminate flooring along one wall. Click the planks together and tap them into place with a tapping block. Continue installing the laminate flooring, row by row, until the entire floor is covered.

5. Trim the laminate flooring

Once the laminate flooring is installed, you will need to trim the edges to fit around the walls and other obstacles. Use a utility knife or a laminate flooring cutter to trim the planks.

6. Install the baseboards

Baseboards will help to cover the expansion gap between the laminate flooring and the walls. Install the baseboards around the perimeter of the room.

7. Enjoy your new laminate flooring

Your new Mohawk laminate flooring is now installed and ready to enjoy. Be sure to follow the manufacturer's care and maintenance instructions to keep your floor looking its best for years to come. ### Additional tips for installing Mohawk laminate flooring on a concrete floor: * Use a moisture meter to make sure the concrete floor is dry before installing the laminate flooring. * Allow the laminate flooring to acclimate to the room for at least 48 hours before installing it. * Stagger the joints of the laminate flooring planks to create a stronger floor. * Leave a 1/4-inch expansion gap around the perimeter of the room to allow the floor to expand and contract. * Use a tapping block to tap the laminate flooring planks into place. Do not use a hammer or other heavy object. * Clean the laminate flooring regularly with a damp mop. Do not use harsh cleaners or abrasive materials.