How To Install Vinyl Flooring In Small Bathroom Floors Singapore

Are you looking to renovate your small bathroom floor in Singapore with vinyl flooring? Vinyl flooring is a popular choice for bathrooms due to its durability, water resistance, and ease of maintenance. Here's a step-by-step guide on how to install vinyl flooring in small bathroom floors in Singapore:

1. Prepare the Subfloor

The subfloor must be smooth, level, and dry before installing the vinyl flooring. Remove any existing flooring, baseboards, and quarter-rounds. Repair any cracks or holes in the subfloor using a patching compound. Sand down any uneven areas to create a smooth surface.

2. Lay Out the Vinyl Flooring

Measure the length and width of your bathroom floor. Cut the vinyl flooring planks to the appropriate size using a utility knife or flooring cutter. Arrange the planks in place without adhering them to the subfloor to ensure proper fit.

3. Apply Adhesive

Apply a thin layer of vinyl flooring adhesive to the subfloor using a notched trowel. The type of adhesive will depend on the type of vinyl flooring you are using. Follow the manufacturer's instructions for the specific adhesive.

4. Install the Vinyl Flooring

Place the vinyl flooring planks onto the adhesive-covered subfloor. Press the planks firmly into place to ensure a secure bond. Stagger the joints between the planks to prevent buckling. Use a tapping block and hammer to gently tap the planks into place if necessary.

5. Trim the Edges

Once all the vinyl flooring planks are installed, trim the edges around the walls, fixtures, and other obstacles. Use a utility knife to make precise cuts. You can use a baseboard or quarter-round molding to cover the expansion gap around the edges.

6. Install Baseboards and Quarter-Rounds

Install baseboards or quarter-rounds around the perimeter of the floor to cover the expansion gap and give your bathroom a finished look. Use a nail gun or adhesive to secure the baseboards or quarter-rounds in place.

7. Clean and Seal

Clean the vinyl flooring surface with a damp mop to remove any dust or debris. Apply a vinyl flooring sealant to protect the flooring and enhance its durability. Allow the sealant to dry completely before using the floor.

Additional Tips:

Plan the layout of your vinyl flooring carefully to minimize waste.
Use a sharp utility knife or flooring cutter for clean cuts.
Follow the manufacturer's instructions for adhesive application and drying times.
Allow the flooring to acclimate to the room temperature for 24 hours before installation.
Maintain the vinyl flooring by sweeping, mopping, and applying a sealant regularly.