How To Lay Vinyl Plank Flooring In Bathroom

Vinyl flooring is a popular choice for bathrooms because it is waterproof, durable, and easy to install. If you are thinking about installing vinyl plank flooring in your bathroom, here is a step-by-step guide to help you get started.

Step 1: Prepare the Floor

The first step is to prepare the floor by removing any existing flooring and cleaning the subfloor. The subfloor should be level and smooth, so you may need to level it with self-leveling compound or sand it down.

Step 2: Install the Underlayment

Once the subfloor is prepared, you need to install the underlayment. The underlayment will help to reduce noise and provide a cushion for the vinyl flooring. There are different types of underlayment available, so be sure to choose one that is appropriate for your bathroom.

Step 3: Lay the Vinyl Planks

Now it's time to lay the vinyl planks. Start by laying the first plank in the corner of the room. Then, continue laying the planks in rows, staggering the joints as you go. Use a tapping block and hammer to tap the planks into place.

Step 4: Cut the Planks

You will need to cut the planks to fit around the edges of the room and around obstacles such as toilets and vanities. Use a sharp utility knife to score the planks and then snap them apart.

Step 5: Install the Moldings

Once the vinyl planks are installed, you need to install the moldings. The moldings will help to seal the edges of the flooring and give it a finished look. There are different types of moldings available, so be sure to choose ones that match your bathroom's style.

Step 6: Grout the Joints

The final step is to grout the joints between the vinyl planks. Grout is a type of sealant that will help to keep water from seeping into the seams. Use a grout float to apply the grout and then wipe away any excess.

Step 7: Seal the Floor

Once the grout has dried, you need to seal the floor. A sealer will help to protect the flooring from wear and tear. Choose a sealer that is specifically designed for vinyl flooring.

Tips for Installing Vinyl Plank Flooring in a Bathroom

Here are a few tips for installing vinyl plank flooring in a bathroom:

Allow the vinyl planks to acclimate to the room temperature for 24 hours before installing them. This will help to prevent them from buckling or warping.
Use a level and a straight edge to ensure that the floor is level and flat before installing the vinyl planks.
Stagger the joints of the vinyl planks as you go. This will help to strengthen the floor and prevent the seams from becoming visible.
Use a tapping block and hammer to tap the vinyl planks into place. Do not use a hammer alone, as this could damage the planks.
Grout the joints between the vinyl planks using a grout float. Wipe away any excess grout with a damp cloth.
Seal the floor using a sealer that is specifically designed for vinyl flooring.