How To Put Vinyl Flooring On Concrete Stairs Without

How to Put Vinyl Flooring on Concrete Stairs Without Risers

Installing vinyl flooring on concrete stairs without risers can be a great way to update the look of your home. It's a relatively simple project that can be completed in a weekend. Here's a step-by-step guide to help you get started.

Materials You'll Need:

Vinyl flooring
Concrete cleaner
Primer
Notched trowel
Thin-set mortar
Grout float
Grout
Caulk gun
Caulk

Step 1: Prepare the Concrete

Start by cleaning the concrete stairs with a concrete cleaner. This will remove any dirt or debris that could interfere with the adhesion of the vinyl flooring. Once the stairs are clean, allow them to dry completely.

Step 2: Apply Primer

Once the stairs are dry, apply a primer to the concrete. This will help to create a bond between the concrete and the vinyl flooring. Allow the primer to dry completely.

Step 3: Spread Thin-Set Mortar

Using a notched trowel, spread a thin layer of thin-set mortar over the concrete stairs. The mortar should be about 1/8 inch thick. Be sure to work in small sections so that the mortar doesn't dry out before you can apply the vinyl flooring.

Step 4: Install the Vinyl Flooring

Starting at the top of the stairs, carefully place the vinyl flooring onto the thin-set mortar. Press down firmly to ensure that the flooring is securely in place. Continue installing the vinyl flooring until all of the stairs are covered.

Step 5: Grout the Seams

Once the vinyl flooring is installed, grout the seams between the tiles. Use a grout float to apply the grout, and then smooth it out with a damp sponge. Allow the grout to dry completely.

Step 6: Caulk the Edges

Caulk the edges of the vinyl flooring to prevent water from seeping in. Use a caulk gun to apply the caulk, and then smooth it out with your finger. Allow the caulk to dry completely.