Installation Of Glue Down Vinyl Plank Flooring

Glue down vinyl plank flooring is a popular choice for homeowners and businesses alike. It is durable, waterproof, and easy to clean. However, the installation process can be a bit tricky, so it is important to follow the instructions carefully.

Here are the essential aspects of installing glue down vinyl plank flooring:

1. Preparation

The first step is to prepare the subfloor. The subfloor must be clean, dry, and level. If the subfloor is not level, you will need to level it using a self-leveling compound.

2. Laying Out The Planks

Once the subfloor is prepared, you can begin laying out the planks. Start by finding the center of the room and working your way out from there. Be sure to stagger the joints between the planks to create a strong bond.

3. Applying The Adhesive

Once the planks are laid out, you can begin applying the adhesive. Use a notched trowel to apply the adhesive to the back of the planks. Be sure to spread the adhesive evenly and to avoid getting any on the edges of the planks.

4. Installing The Planks

Once the adhesive has been applied, you can begin installing the planks. Start by pressing the first plank into place. Then, use a tapping block and a hammer to tap the plank into place. Be sure to use even pressure and to avoid damaging the planks.

5. Trimming The Planks

Once the planks are installed, you will need to trim the edges. Use a utility knife to score the planks and then snap them off. Be sure to wear safety glasses when trimming the planks.

6. Finishing The Installation

Once the planks are trimmed, you can finish the installation by rolling the floor with a heavy roller. This will help to ensure that the planks are properly bonded to the subfloor.