Laying Vinyl Plank Flooring On Uneven Subfloor

Installing vinyl plank flooring on an uneven subfloor can be a challenge, but it is possible to achieve a professional-looking result with some careful preparation. The key is to level the subfloor as much as possible before installing the flooring. This can be done by using a self-leveling compound or by installing a layer of plywood or backer board over the subfloor.

Once the subfloor is level, you can begin installing the vinyl plank flooring. Start by laying out the planks in a dry fit to make sure they fit together properly. Once you are satisfied with the layout, you can begin gluing the planks down. Use a trowel to apply the glue to the subfloor, and then press the planks into place. Make sure to use a level to ensure that the planks are level as you install them.

Once the glue has dried, you can trim the excess flooring around the edges of the room. You can use a utility knife or a circular saw to make the cuts. Once the flooring is trimmed, you can install the baseboards and moldings to finish the job.

Here are some tips for laying vinyl plank flooring on an uneven subfloor:

Use a self-leveling compound or a layer of plywood or backer board to level the subfloor.
Lay out the planks in a dry fit to make sure they fit together properly.
Use a trowel to apply the glue to the subfloor, and then press the planks into place.
Use a level to ensure that the planks are level as you install them.
Trim the excess flooring around the edges of the room.
Install the baseboards and moldings to finish the job.

By following these tips, you can successfully install vinyl plank flooring on an uneven subfloor.