Pergo Flooring Installation – A Step-By-Step Guide

Pergo Flooring Installation: A Step-by-Step Guide

Installing Pergo flooring is a relatively straightforward process that can be completed by most DIYers. However, it's important to carefully follow the manufacturer's instructions to ensure a successful installation.

Tools and Materials

Before you begin, you'll need to gather the following tools and materials:

Pergo flooring planks
Underlayment (if required)
Tape measure
Pencil
Utility knife
Tapping block
Pull bar
Spacer wedges
Miter saw or circular saw
Vacuum cleaner

Step 1: Prepare the Subfloor

The first step is to prepare the subfloor. The subfloor should be level, dry, and free of any debris. If the subfloor is not level, you may need to level it using a self-leveling compound or plywood.

Step 2: Install the Underlayment

If your flooring requires underlayment, install it according to the manufacturer's instructions. Underlayment helps to absorb sound and reduce moisture.

Step 3: Lay the First Row of Planks

Start by laying the first row of planks along the longest wall in the room. Leave a 1/4-inch gap between the planks and the wall to allow for expansion. Use spacer wedges to maintain the gap.

Step 4: Tap the Planks Together

To join the planks together, use a tapping block and hammer. Place the tapping block on the end of the plank and gently tap it until the planks are flush.

Step 5: Continue Laying the Planks

Continue laying the planks, working your way across the room. Stagger the joints between the rows to create a more durable floor.

Step 6: Cut and Fit the Last Row

The last row of planks will likely need to be cut to fit. Measure the length of the space and cut the planks accordingly. Use a miter saw or circular saw for precise cuts.

Step 7: Install the Trim

Once the flooring is installed, you can install the trim around the perimeter of the room. Trim helps to hide the expansion gap and gives the floor a finished look.

Tips for a Successful Installation

Make sure the subfloor is clean, dry, and level.
Follow the manufacturer's instructions carefully.
Use a tapping block and hammer to join the planks together.
Stagger the joints between the rows for a more durable floor.
Leave a 1/4-inch gap between the planks and the walls to allow for expansion.
Install the trim around the perimeter of the room to hide the expansion gap and give the floor a finished look.